New BlackBox 500S DVB Digital Satellite Receiver
Main Features:
1) 250 MHz IBM PowerPC Processor (350 Mips)
2) 2 LED status
3) Linux Operating System
4) Full automatic service scan
5) Supports directly bouquet-lists (indirect unlimited)
6) Supports multiple LNB-Switching control (supports DiSEqC)
7) 1 x Smartcard-Reader
8) Unlimited channel lists for TV/Radio
9) SPDI/F interface for digital bit stream out (AC-3 / DTS)
10) MPEG2 Hardware decoding
11) Channel-change time < 1 second
12) Fully adaptable OSD in many languages (skin-support)
13) 100Mbit full duplex Ethernet Interface
14) Supports EPG (electronic program guide)
15) 1 x Scart-interfaces (fully controlled by software)
Technical details:
Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL and NTSC
Video Formats 4:3 / 16:9
Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
Letterbox precolating for 4:3 TV-Device Audio decoder:
Audio compression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
Output: FBAS,RGB,S-VHS over OSD selectable
DBS-Tuner:
Frequency Range 950 .. 2150 MHz
Signal Level - 65 dBm .. - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC
FEC Viterbi and Reed-Solomon
Frequency rate: 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
De-multiplexing according ISO 13818-1
Ethernet:
100 MBit compatible, bi-directional interface
Function Update of Firmware and Reprogramming
LNB Power and polarization:
LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical < 14V without load, > 11,5V at 400mA
LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
LNB shut-off at Standby-Mode
Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)
Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
Serial Interface RS 232:
Typ RS232 bidirectional
Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Reprogramming
Power consumption:
< 10W / 12V
Input voltage:
DC12V,alternating current +/- 15%
External power supply:
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 1A
Others:
Ambient Temperature +15°C...+35°C
Humidity < 80%
Box contents:
1 x Blackbox DM500S receiver
1 x remote control
1 x manual
1 x cable
Warranty: 1 year
To USA, Europe and Australia, we send via DHL, UPS and FedEx. To other countries, we send via EMS.
